CONTINENTAL HYDRAULICS

CONTINENTAL HYDRAULICS公司介紹：

CONTINENTAL HYDRAULICS產品中使用在一些zui惡劣的環境中、聲譽的耐久性和業績繼續增長。所有的產品都是100%測試質量控制在實驗室和外地的保證，CONTINENTAL不負客戶的期望，產品符合或超過了性能和使用壽命的標準。為了更好地為當前和新興的流體動力要求，CONTINENTAL的工程師們不斷在工作中提高現有產品和開發新的流體動力技術。

除了其廣泛的在線液壓泵，液壓閥，液壓動力單元，大陸水力學響應和提供專門訂貨液壓產品在創記錄的時間，幫助縮短上市時間周期。各方面都得到廣大用戶的好評。

CONTINENTAL HYDRAULICS產品描述：

CONTINENTAL HYDRAULICS，CONTINENTAL HYDRAULICS液壓泵，CONTINENTAL HYDRAULICS液壓閥

可變排量液壓泵Variable displacement hydraulic pump CONTINENTAL HYDRAULICS 

軸向柱塞泵Axial piston pump CONTINENTAL HYDRAULICS 

液壓比例電磁閥Hydraulic proportional solenoid valve CONTINENTAL HYDRAULICS 

液壓換向閥Hydraulic directional valve CONTINENTAL HYDRAULICS 

液壓動力單元Hydraulic power unit CONTINENTAL HYDRAULICS 

液壓集成塊Hydraulic manifold CONTINENTAL HYDRAULICS 

液壓疊加方向滑閥Stackable hydraulic directional spool valve CONTINENTAL HYDRAULICS

Products

Variable Displacement, Pressure Compensated Axial Piston Pumps

Hardened swashplate for extended trunnion life

Balanced piston shoes for high efficiency 

Replaceable port plate and wear plate simplify maintenance

Efficiently designed porting for reduced noise

Four pump controls offer design flexibility

Tandem pump options for multiple pump applications

Maximum volume control is standard for application versatility

High speed operation for applications

Heavy duty cylinder block and body castings provide long life and reduced noise

Product Description

The variable volume and pressure compensated design simplifies circuit design, and reduces heat buildup and noise. Four pump control options permit the designer to choose the most efficient means to power his hydraulic equipment. Choices include the standard pressure compensator control, remote pressure control, load sensing control, and horsepower limiting control.

Brass piston slippers pivot and rotate to equalize wear while a fluid passage through the slipper reduces loading and provides lubrication for the piston shoe and wear plate. Hardened swash plate and trunnion pins provide rugged support for the piston block and associated rotating group components.

Efficiently designed porting reduces noise at all pressure and flow levels for quiet, efficient operation that eliminates the need for noise shrouds. The rugged, cast iron body is thicker at stress points which contributes to quiet operation.

Click here to l us what you need.

Specifications

Mountings: SAE 2 bolt mountings. SAE ‘A’, SAE’ B’, and SAE ‘C’

Tandem pump drive capabilities 

Capacities: 6, 10, 15, 20 29 GPM @ 1750 RPM

Displacements: .88, 1.26, 2.09, 2.62, and 3.78 cubic inches per revolution 

Pressure Compensation Ranges: 200 to 3500 PSI continuous duty, up to 4000 PSI intermittent duty

Recommended Fluids: 

Petroleum based fluids are recommended. Fluids should be designated by the fluid manufacturer for use in hydraulic systems. Fluids should contain inhibitors to prevent rust and oxidation and should contain anti-wear, anti-foam, and deaerating agents. For other fluid types, please contact your Continental Hydraulics representative.

Recommended Operating Viscosity

Petroleum based fluids: 

Optimum – 140 sus (30 Cst.) 

Continuous Minimum – 60 sus (10 Cst.) 

Continuous Maximum – 750 sus (160 Cst.) 

Max cold start up 7500 SUS

Fluid Cleanliness – ISO 18-16-13 is recommended

Operating Temperature – Operating temperature is determined by the viscosity characteristics of the fluid used. Control operating temperature as needed to assure that fluid viscosity is within acceptable limits. Because high temperatures degrade seals, reduce the service life of the fluid, and create scalding hazards, fluid temperatures should not exceed 180° F. (82° C.) at the case drain. 

Mounting Position – Unrestricted. However, horizontal mounting is preferred. 

Relief valves are recommended for all applications to help protect personnel and the system from potentially damaging overloads

Options and Accessories

Pressure Compensated - Delivers only the flow required by the system, while maintaining the set pressure. This reduces horsepower needs and saves unnecessary wear on the system. 

Remote Pressure Control – Includes all the features of the standard control, with the added feature of pressure control from a remote location. This can be accomplished both manually, or with the utilization of an electronic proportional pressure control.

Load Sensing Control – Provides constant flow through a given orifice and varies pressure with load requirements. Results in maximum efficiency and minimum heat generation.

Horsepower Limiting Control – Best choice for high pressure/low flow and high flow/low pressure systems. You can adjust the pump to meet your exact system requirements.

Typical Applications

equipment

Marine auxiliary power

Construction equipment

Oil field equipment

Machine tools

Metal forming and stamping

Packaging machinery

CONTINENTAL HYDRAULICS液壓泵，CONTINENTAL HYDRAULICS液壓閥

諾希德優勢提供!：（總機）（自動）：www.rosit.com

如需詢價！請?zhí)峁┮韵沦Y料直接傳真給我們（品牌+型號+數量+你的公司名//傳真）等相關資料。我們將在收到資料后2-3個工作日做出回復）

諾希德專業代理經銷國外優質品牌的機電設備、儀器儀表、五金工具。于2004年成立于深圳，經過近10年的發展，年銷售額過億。并在國外設有多家子公司，直接從國外生產廠家源頭采購。成為中國機電設備行業的供應商。

諾希德主要服務鋼鐵，石化，造紙，包裝、電力，船舶、采礦、食品、飼料等。并與這些行業大部分的大型企業建立起直接或間接的合作模式。諾希德已為中國眾多大型企業提供進口設備：如：寶鋼、鞍鋼、武鋼、首鋼、包鋼、本鋼、邯鋼、攀鋼、凌鋼、萊鋼、天鋼、八鋼、南鋼、杭鋼、中石油，中海油、殼牌集團、茂名石化、盤錦石化、齊魯石化、廣州石化、天津石化、蘭州石化、燕山石化、大慶油田。。。等。

諾希德公司信譽至上、源頭采購、*、品質保障！我們將本著“誠信為本，共創雙贏”。竭誠為您提供安全，可靠，完善的售前，售后服務。如有任何進口產品的需求或疑難，來函咨詢！我們?yōu)槟闾峁﹥?yōu)質的服務！